REAR SPRAY BARS
A rear of the tanker spray bar is included on all water distributors. Each spray bar has two (2) 4-way adjustable type flat fan spray head. Each spray head is individually cab controlled for on/off.
As optional equipment rear spray systems can be ordered with three (3) rear spray head each individually cab controlled, or with four (4) rear spray heads each individually cab controlled for on/off. Each spray head produces a water flow of about 200 G.P.M. the number of spray head should be sized to the output of the water pump.

SIDE JET SPRAY BAR
(Optional) A side jet spray bar is a front tank top, two (2) spray head spray bar that produces a vertical water spray on each side of the distributor. Each spray head is individually cab controlled for on/off.

FRONT BULKHEAD SPRAY BAR
(Optional) A front bulkhead spray bar is a two (2) spray head spray bar located on the front tanker bulkhead that has two (2) 4-way adjustable type flat fan spray head.Each spray head is individually cab controlled for on/off.

MID-SHIP SPRAY BAR
(Optional) Mid-ship spray bars are located at the front lower bulkhead of the water distributor with two (2) spray heads, one on each side, each individually cab controlled for on/off. There are two types of mid-ship spray bars 1st one with 4-way adjustable spray head producing a flat fan spray projecting out from each side, or 2nd one with street flushing nozzles projecting downward and to the side, used for cleaning road debris.

FRONT OF BUMPER SPRAY BAR
(Optional) Front bumper spray bars available in two types 1st with 4-way adjustable type, flat fan spray head(s), one (1) or two (2) spray heads and 2nd with street flushing nozzles projecting downward and to the side, used for cleaning road debris, also available with one (1) or two (2) spray heads. Each spray head is individually cab controlled for on/off.

GRAVITY SPRAY BAR
(Optional) Gravity spray bars are located at the rear of the water distributor, liquid is discharged from the tank via a cab operated full flow valve, into a full width horizontal spray bar. The horizontal spray bar is slotted at the bottom to create a water saturation pattern (wall of water). Gravity spray bars are available in 3 inch, 3" spray bar with a 4" valve inlet, 4 inch, 4" spray bar with a 6" valve inlet, or 6 inch 5" spray bar with a 6" valve inlet. Every gravity spray bar has clean outs located at each end.

PRESSURIZED HORIZONTAL SPRAY BAR
(Optional) Pressurized horizontal spray bars are located at the rear of the water distributor or on the front tank bulkhead when used in conjunction with a mold board on a "Drop Tanker". A pressurized horizontal spray bar is similar to the gravity spray bar in design only they are supplied through pump pressure in stead of gravity. Pressurized horizontal spray bars are used to inject liquid into the soil for deeper than normal penetration. Available in 3 inch horizontal spray bar with 4" inlet valves or 4 inch horizontal spray bar with 4" inlet valves. Each spray bar is individually cab controlled for on/off. Each pressurized horizontal spray bar has clean outs located at each end.

GRAVITY DROP
(Optional) Gravity drops are located at the rear tank head available in 6 inch with a 6" valve, or 10 inch with a 10" valve. The intention of a gravity drop is to discharge the contents of the water distributor in a few seconds. Gravity drops are available in cab controlled for on/off (optional) or manual controlled at the for on/off.